Ø If you need to make some room at the top of your diagram, select the Move/Size tool, then choose menu Edit>Select all (or Ctrl + A), then using the cursor, drag the whole diagram lower on the view to make room for the title.
Ø Select the Sketch Comment tool. Click at the top of your sketch to add a title; the Comment dialog box will open.
Ø Type in a title for your sketch (e.g., Work To Do Project Model). Choose a font, size, color, shape and word position for your comment, then click OK.
Ø Still with the Sketch Comment tool, click on the sketch in the center of the left hand loop. Click on the dropdown arrow in the Graphics field Image box and choose the positive sign ( + ) or the snowball image
, then from the Shape field choose Loop Clkwse (clockwise).
Ø Click on the Black button in the middle right just below the word Color and click on red in the color palette that appears. Repeat this with the button labeled Shape color, and click OK. If you need to, reposition the loop image and resize the loop by dragging its handle. Note that you can also include a bitmap or metafile from the clipboard.
Ø Click on the sketch in the center of the right hand loop. Click on the dropdown arrow in the Image box and choose the negative sign ( — ) or the balance image
, then from the Shape field choose Loop Counter (counter clockwise), set the two colors to blue and click OK. If you need to, reposition the loop image and resize the loop by dragging its handle.
Your diagram should now look similar to the figure below:
